Modding A 2021 PRS SE Custom 22 Semi-Hollowbody With Some CRAZY Wiring

My goal with this guitar is to have as many pickup combination options as possible while having it still appear to be "stock."  If you the next owner doesn't like the different tones, don't pull up the pots and it's about as stock as you can get.

Both Push/Pulls "Down"

  1. 1 - Bridge Humbucker
  2. 2 - Inner Coils in Parallel
  3. 3 - Bridge and Neck Humbuckers in Parallel
  4. 4 - Outer Coils in Parallel
  5. 5 - Neck Humbucker

Volume Push/Pull "Up", Tone Push/Pull "Down"

  1. Bridge Humbucker
  2. Inner Coils in Parallel, Out of Phase
  3. Bridge and Neck Humbuckers in Parallel, Out of Phase
  4. Out Coils in Parallel, Out of Phase
  5. Neck Humbucker

Tone Push/Pull "Up", Volume Push/Pull "Down"

  1. Bridge and Neck Humbucker In Series, In Phase
  2. Inner Coils In Series, In Phase
  3. Bridge and Neck Humbucker In Series, In Phase
  4. Out Coils In Series, In Phase
  5. Bridge and Neck Humbucker In Series, In Phase

Both Push/Pulls "Up"

  1. Bridge and Neck Humbucker In Series, Out of Phase
  2. Inner Coils In Series, Out of Phase
  3. Bridge and Neck Humbucker In Series, Out of Phase
  4. Out Coils In Series, Out of Phase
  5. Bridge and Neck Humbucker In Series, Out of Phase
Here is the diagram used to achieve this mod.  This can also be purchased in pre-wired kit form here or you can visit the same link to find further links to all the components used to create this wiring harness in proper DIY fashion.