Telecaster 4-Way Wiring Kit | CTS 450G 250 kΩ Audio Taper Pots, Oak Grigsby Switch, Mallory 150 Cap

Important - Please leave a message in the "Special Instructions For Seller" box at time of checkout for "reversed" layout - any other customizations please reach out prior to purchase to verify availability.  Thanks so much! 

Here's a super easy kit to upgrade your Telecaster or T-style guitar with top quality components for your 2-Pickup Telecaster.  Potentiometer spacing is 2-1/2" (Center-to-Center) and aligns with Fender Part No. 0992058000 and Kluson Telecaster Control Plates.  If your neck pickup has a grounded cover, a separate "Chassis Ground" lead needs to be added and isolated from the coil's "Signal Ground".

Comes completely wired and ready to install.  Simply connect your pickup hot leads and grounds.

• CTS 450G 250 kΩ Audio Taper Potentiometers
• Oak Grigsby 4-Way Blade Switch
  
• Mallory 150 .022 µF, .047 µF, or .1 µF Capacitor    - .047 µF is Most Common w/ Single Coil Pickups
• Optional .001 µF Ceramic Disc / 150 kΩ Metal Film Resistor Treble Bleed
• Switchcraft #11 Mono Output Jack
• Gavitt Vintage Style Cloth Pushback Wire

Each kit is assembled and soldered with extreme care and concern for ease of installation and many years of trouble free use.